This paper reports the development of green bio-composite mortars, obtained reusing spent coffee ground (SCG), an agri-food residue, in the light of the Circular Economy approach. This process can boost the sustainability in Construction and proposes an alternative to SCG disposal in landfill, potentially dangerous to humans and the environment. For the first time, specimens were produced and compared using different blends of conventional hydraulic binders (ordinary Portland cement and natural hydraulic lime); SCG partially substituted sand (up to 15 wt%, with a 2.5% increment) for the aggregate mix. The manufacturing process was performed at ambient conditions (20 degrees C, 65% RH) resulting highly sustainable, and consisted of simple operative steps reproducible in a real building site. The prepared mixes were fully characterised to assess their technological potentials in construction. Morphology analysis, performed by Scanning Electron Microscopy (SEM), showed SCG addition led to a more compact structure. Considering the functional properties, results widely range on binder blend base, offering various concrete applications; it was observed that with SCG addition, despite a decrease in the bulk density (up to 26%), the mechanical performance still remained suitable for proper masonry applications, ac-cording to the relevant standards (class of resistance M2.5-M10). A light water imbibition increase was registered (about 5%) while a significant decrease of the capillarity index was seen. Moreover, a robust thermal conduc-tivity reduction was observed (up to 72%), making the mortars highly suitable for energy-saving uses in building. Finally, a reduction in the manufacturing cost (up to 8%) was calculated, granting significant financial saving in light of the industrial symbiosis. These encouraging results showed that reusing SCG not only provides numerous benefits to the overall building performance and management but it is also a valid alternative to usual SCG disposal. The high amount of reused bio-waste significantly widens the knowledge of greener and more efficient building sector, making the prepared mortars promising candidates for the Minimum Environmental Criteria certification, in light of the recent EU regulations, and in line with the principles of the Circular Economy.

Development of energy-saving innovative hydraulic mortars reusing spent coffee ground for applications in construction

Scalera, Francesca;Striani, Raffaella;Corcione, Carola Esposito;
2023-01-01

Abstract

This paper reports the development of green bio-composite mortars, obtained reusing spent coffee ground (SCG), an agri-food residue, in the light of the Circular Economy approach. This process can boost the sustainability in Construction and proposes an alternative to SCG disposal in landfill, potentially dangerous to humans and the environment. For the first time, specimens were produced and compared using different blends of conventional hydraulic binders (ordinary Portland cement and natural hydraulic lime); SCG partially substituted sand (up to 15 wt%, with a 2.5% increment) for the aggregate mix. The manufacturing process was performed at ambient conditions (20 degrees C, 65% RH) resulting highly sustainable, and consisted of simple operative steps reproducible in a real building site. The prepared mixes were fully characterised to assess their technological potentials in construction. Morphology analysis, performed by Scanning Electron Microscopy (SEM), showed SCG addition led to a more compact structure. Considering the functional properties, results widely range on binder blend base, offering various concrete applications; it was observed that with SCG addition, despite a decrease in the bulk density (up to 26%), the mechanical performance still remained suitable for proper masonry applications, ac-cording to the relevant standards (class of resistance M2.5-M10). A light water imbibition increase was registered (about 5%) while a significant decrease of the capillarity index was seen. Moreover, a robust thermal conduc-tivity reduction was observed (up to 72%), making the mortars highly suitable for energy-saving uses in building. Finally, a reduction in the manufacturing cost (up to 8%) was calculated, granting significant financial saving in light of the industrial symbiosis. These encouraging results showed that reusing SCG not only provides numerous benefits to the overall building performance and management but it is also a valid alternative to usual SCG disposal. The high amount of reused bio-waste significantly widens the knowledge of greener and more efficient building sector, making the prepared mortars promising candidates for the Minimum Environmental Criteria certification, in light of the recent EU regulations, and in line with the principles of the Circular Economy.
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S0959652623008223-main.pdf

solo utenti autorizzati

Tipologia: Versione editoriale
Licenza: Copyright dell'editore
Dimensione 7.11 MB
Formato Adobe PDF
7.11 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11587/533706
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 13
  • ???jsp.display-item.citation.isi??? 7
social impact