The increasing demand of piezoelectric energy harvesters for wearable and implantable applications requires biocompatible materials and careful structural device design, paying special attention to the conformability characteristics, properly tailored to scavenge continuously electrical energy even from the tiniest body movements. This paper provides a comprehensive study on a flexible and biocompatible aluminum nitride (AlN) energy harvester based on a new alternative fabrication approach, exploiting a thin polyimide (PI) substrate, prepared by spin coating of precursors solution. This strategy allows manufacturing substrates with adjustable thickness to meet conformability requirements. The device is based on a piezoelectric AlN thin film, sputtered directly onto the soft PI substrate, without poling/annealing processes and patterned by simple and low cost microfabrication technologies. AlN active layer, grown on soft substrate, exhibits good morphological and structural properties with roughness root mean squared (Rrms) of 6.35 nm, columnar texture and (002) c-axis orientation. Additionally, piezoelectric characterization has been performed and the extracted piezoelectric coefficient value of AlN thin film resulted to be 4.93 ± 0.09 pm/V. The fabricated flexible AlN energy harvester generates an output peak-to-peak voltage of ∼1.4 V and a peak-to-peak current up to 1.6 μA, under periodical deformation, corresponding to a current density of 2.1 μA/cm2, and providing a maximum generated power of 1.57 μW under optimal resistive load. Furthermore, the AlN energy harvester exhibits high elasticity and resistance to mechanical fatigue. High quality AlN piezoelectric layers on elastic substrates with tunable thicknesses pave the way for the development of a straightforward technological platform for wearable/implantable energy harvesters and biomechanical sensors.

Flexible Piezoelectric Energy-Harvesting Exploiting Biocompatible AlN Thin Films Grown onto Spin-Coated Polyimide Layers

Algieri L.
;
Todaro M. T.;Mastronardi V.;Qualtieri A.;Giannini C.;De Vittorio M.
2018-01-01

Abstract

The increasing demand of piezoelectric energy harvesters for wearable and implantable applications requires biocompatible materials and careful structural device design, paying special attention to the conformability characteristics, properly tailored to scavenge continuously electrical energy even from the tiniest body movements. This paper provides a comprehensive study on a flexible and biocompatible aluminum nitride (AlN) energy harvester based on a new alternative fabrication approach, exploiting a thin polyimide (PI) substrate, prepared by spin coating of precursors solution. This strategy allows manufacturing substrates with adjustable thickness to meet conformability requirements. The device is based on a piezoelectric AlN thin film, sputtered directly onto the soft PI substrate, without poling/annealing processes and patterned by simple and low cost microfabrication technologies. AlN active layer, grown on soft substrate, exhibits good morphological and structural properties with roughness root mean squared (Rrms) of 6.35 nm, columnar texture and (002) c-axis orientation. Additionally, piezoelectric characterization has been performed and the extracted piezoelectric coefficient value of AlN thin film resulted to be 4.93 ± 0.09 pm/V. The fabricated flexible AlN energy harvester generates an output peak-to-peak voltage of ∼1.4 V and a peak-to-peak current up to 1.6 μA, under periodical deformation, corresponding to a current density of 2.1 μA/cm2, and providing a maximum generated power of 1.57 μW under optimal resistive load. Furthermore, the AlN energy harvester exhibits high elasticity and resistance to mechanical fatigue. High quality AlN piezoelectric layers on elastic substrates with tunable thicknesses pave the way for the development of a straightforward technological platform for wearable/implantable energy harvesters and biomechanical sensors.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11587/461801
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 51
  • ???jsp.display-item.citation.isi??? 47
social impact