Wireless Sensor Networks (WSNs) are receiving an ever increasing attention because they are one of the most important technologies enabling the Internet of Things vision. Since nodes of these networks are battery-powered, energy efficiency represents one of the main design objectives. This goal can be primarily achieved through an optimization of the communication phase, which is the most power consuming operation for a WSN node. However, the limited computational and storage resources of physical devices make the design of complex communication protocols particularly hard, suggesting, on the contrary, to integrate more simple communication protocols with hardware solutions aimed at energy saving. In this work, a new MAC protocol, compatible with the IEEE 802.15.4 standard, and a reconfigurable beam-steering antenna are presented and validated. They significantly reduce the nodes’ power consumption by exploiting scheduling techniques and directional communications. Specifically, both during transmission and receiving phases, the node activates exclusively the antenna sector needed to communicate with the intended neighbour. The designed antenna and the proposed protocol have been thoroughly evaluated by means of simulations and test-beds, which have highlighted their good performance. In particular, the MAC protocol has been implemented on the Contiki Operating System and it was compared with the IEEE 802.15.4 standard solution.

An Energy-Efficient MAC Scheduler based on a Switched-Beam Antenna for Wireless Sensor Networks

CATARINUCCI, Luca;GUGLIELMI, SERGIO;MAINETTI, LUCA;MIGHALI, VINCENZO;PATRONO, Luigi;STEFANIZZI, MARIA LAURA;TARRICONE, Luciano
2013-01-01

Abstract

Wireless Sensor Networks (WSNs) are receiving an ever increasing attention because they are one of the most important technologies enabling the Internet of Things vision. Since nodes of these networks are battery-powered, energy efficiency represents one of the main design objectives. This goal can be primarily achieved through an optimization of the communication phase, which is the most power consuming operation for a WSN node. However, the limited computational and storage resources of physical devices make the design of complex communication protocols particularly hard, suggesting, on the contrary, to integrate more simple communication protocols with hardware solutions aimed at energy saving. In this work, a new MAC protocol, compatible with the IEEE 802.15.4 standard, and a reconfigurable beam-steering antenna are presented and validated. They significantly reduce the nodes’ power consumption by exploiting scheduling techniques and directional communications. Specifically, both during transmission and receiving phases, the node activates exclusively the antenna sector needed to communicate with the intended neighbour. The designed antenna and the proposed protocol have been thoroughly evaluated by means of simulations and test-beds, which have highlighted their good performance. In particular, the MAC protocol has been implemented on the Contiki Operating System and it was compared with the IEEE 802.15.4 standard solution.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11587/378369
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 29
  • ???jsp.display-item.citation.isi??? ND
social impact