The positive effect of fibers on the bond of reinforcing bars in concrete is widely recognized and supported in literature; on the contrary information are not available on recycled steel fiber reinforced concrete. The experimental work discussed in this paper represents a part of a wider analysis, performed by the authors, on the mechanical performance of RSFRC. In particular the main objective is to investigate on the bond behavior between steel bar and recycled steel fiber (from waste tires) reinforced concrete. To this aim eccentric pull-out test on prismatic samples were designed varying the type of fiber (recycled and industrial steel fibers) and the concrete cover-bar diameter ratio; in addition similar tests were carried out on plain concrete for comparison purpose. The experimental data in terms of peak bond stress, mode of failure and bond stress-slip curves are analyzed and discussed evidencing the good bond performance of specimens realized with recycled steel fiber reinforced polymer compared with both those realized with both plain and industrial fiber reinforced concrete.
I calcestruzzi fibrorinfrozati con fibre in acciaio da riciclo: performance meccaniche e strutturali
LEONE, Marianovella;CENTONZE, GIUSEPPE;VASANELLI, EMILIA;MICELLI, Francesco;AIELLO, Maria Antonietta
2012-01-01
Abstract
The positive effect of fibers on the bond of reinforcing bars in concrete is widely recognized and supported in literature; on the contrary information are not available on recycled steel fiber reinforced concrete. The experimental work discussed in this paper represents a part of a wider analysis, performed by the authors, on the mechanical performance of RSFRC. In particular the main objective is to investigate on the bond behavior between steel bar and recycled steel fiber (from waste tires) reinforced concrete. To this aim eccentric pull-out test on prismatic samples were designed varying the type of fiber (recycled and industrial steel fibers) and the concrete cover-bar diameter ratio; in addition similar tests were carried out on plain concrete for comparison purpose. The experimental data in terms of peak bond stress, mode of failure and bond stress-slip curves are analyzed and discussed evidencing the good bond performance of specimens realized with recycled steel fiber reinforced polymer compared with both those realized with both plain and industrial fiber reinforced concrete.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
